Up to date
This page is up to date for Redot 4.3.
If you still find outdated information, please create an issue.
Using TileMaps¶
See also
This page assumes you have created or downloaded a TileSet already. If not, please read Using TileSets first as you will need a TileSet to create a TileMap.
Introduction¶
A tilemap is a grid of tiles used to create a game's layout. There are several benefits to using TileMapLayer nodes to design your levels. First, they make it possible to draw the layout by "painting" the tiles onto a grid, which is much faster than placing individual Sprite2D nodes one by one. Second, they allow for much larger levels because they are optimized for drawing large numbers of tiles. Finally, you can add collision, occlusion, and navigation shapes to tiles, adding greater functionality to the TileMap.
Specifying the TileSet in the TileMapLayer¶
If you've followed the previous page on Using TileSets, you should have a TileSet resource that is built-in to the TileMapLayer node. This is good for prototyping, but in a real world project, you will generally have multiple levels reusing the same tileset.
The recommended way to reuse the same TileSet in several TileMapLayer nodes is to save the TileSet to an external resource. To do so, click the dropdown next to the TileSet resource and choose Save:
Saving the built-in TileSet resource to an external resource file¶
Multiple TileMapLayers and settings¶
When working with tilemaps it's generally advised that you use multiple TileMapLayer nodes when appropriate. Using multiple layers can be advantageous, for example, this allows you to distinguish foreground tiles from background tiles for better organization. You can place one tile per layer at a given location, which allows you to overlap several tiles together if you have more than one layer.
Each TileMapLayer node has several properties you can adjust:
Enabled: If
true, the layer is visible in the editor and when running the project.TileSet The tileset used by the TileMapLayer node.
Rendering¶
Y Sort Origin: The vertical offset to use for Y-sorting on each tile (in pixels). Only effective if Y Sort Enabled under CanvasItem settings is
true.X Draw Order Reversed Reverses the order tiles are drawn on the X axis. Requires that Y Sort Enabled under CanvasItem settings is
true.Rendering Quadrant Size A quadrant is a group of tiles drawn together on a single CanvasItem for optimization purposes. This setting defines the length of a square's side in the map's coordinate system. The quadrant size does not apply to a Y sorted TileMapLayer since tiles are grouped by Y position in that case.
Physics¶
Collision Enabled Enables or disables collision.
Use Kinematic Bodies When true TileMapLayer collision shapes will be instantiated as kinematic bodies.
Collision Visibility Mode Whether or not the TileMapLayer's collision shapes are visible. If set to default, then it depends on the show collision debug settings.
Reordering layers¶
You can reorder layers by drag-and-dropping their node in the Scene tab. You can also switch between which TileMapLayer node you're working on by using the buttons in the top right corner of the TileMap editor.
Note
You can create, rename or reorder layers in the future without affecting existing tiles. Be careful though, as removing a layer will also remove all tiles that were placed on the layer.
Opening the TileMap editor¶
Select the TileMapLayer node, then open the TileMap panel at the bottom of the editor:
Opening the TileMap panel at the bottom of the editor. The TileMapLayer node must be selected first.¶
Selecting tiles to use for painting¶
First, if you've created additional layers above, make sure you've selected the layer you wish to paint on:
Selecting a layer to paint on in the TileMap editor¶
Tip
In the 2D editor, the layers you aren't currently editing from the same TileMapLayer node will appear grayed out while in the TileMap editor. You can disable this behavior by clicking the icon next to the layer selection menu (Highlight Selected TileMap Layer tooltip).
You can skip the above step if you haven't created additional layers, as the first layer is automatically selected when entering the TileMap editor.
Before you can place tiles in the 2D editor, you must select one or more tiles in the TileMap panel located at the bottom of the editor. To do so, click a tile in the TileMap panel, or hold down the mouse button to select multiple tiles:
Selecting a tile in the TileMap editor by clicking it¶
Tip
Like in the 2D and TileSet editors, you can pan across the TileMap panel using the middle or right mouse buttons, and zoom using the mouse wheel or buttons in the top-left corner.
You can also hold down Shift to append to the current selection. When selecting more than one tile, multiple tiles will be placed every time you perform a painting operation. This can be used to paint structures composed of multiple tiles in a single click (such as large platforms or trees).
The final selection does not have to be contiguous: if there is empty space between selected tiles, it will be left empty in the pattern that will be painted in the 2D editor.
Selecting multiple tiles in the TileMap editor by holding down the left mouse button¶
If you've created alternative tiles in your TileSet, you can select them for painting on the right of the base tiles:
Selecting an alternative tile in the TileMap editor¶
Lastly, if you've created a scenes collection in the TileSet, you can place scene tiles in the TileMap:
Placing a scene tile containing particles using the TileMap editor¶
Painting modes and tools¶
Using the toolbar at the top of the TileMap editor, you can choose between several painting modes and tools. These modes affect operation when clicking in the 2D editor, not the TileMap panel itself.
From left to right, the painting modes and tools you can choose are:
Selection¶
Select tiles by clicking a single tile, or by holding down the left mouse button to select multiple with a rectangle in the 2D editor. Note that empty space cannot be selected: if you create a rectangle selection, only non-empty tiles will be selected.
To append to the current selection, hold Shift then select a tile. To remove from the current selection, hold Ctrl then select a tile.
The selection can then be used in any other painting mode to quickly create copies of an already-placed pattern.
You can remove the selected tiles from the TileMap by pressing Del.
You can toggle this mode temporarily while in Paint mode by holding Ctrl then performing a selection.
Tip
You can copy and paste tiles that were already placed by performing a selection, pressing Ctrl + C then pressing Ctrl + V. The selection will be pasted after left-clicking. You can press Ctrl + V another time to perform more copies this way. Right-click or press Escape to cancel pasting.
Paint¶
The standard Paint mode allows you to place tiles by clicking or holding down the left mouse button.
If you right-click, the currently selected tile will be erased from the tilemap. In other words, it will be replaced by empty space.
If you have selected multiple tiles in the TileMap or using the Selection tool, they will be placed every time you click or drag the mouse while holding down the left mouse button.
Tip
While in Paint mode, you can draw a line by holding Shift before holding down the left mouse button, then dragging the mouse to the line's end point. This is identical to using the Line tool described below.
You can also draw a rectangle by holding Ctrl and Shift before holding down the left mouse button, then dragging the mouse to the rectangle's end point. This is identical to using the Rectangle tool described below.
Lastly, you can pick existing tiles in the 2D editor by holding Ctrl then clicking on a tile (or holding and dragging the mouse). This will switch the currently painted tile(s) to the tile(s) you've just clicked. This is identical to using the Picker tool described below.
Line¶
After selecting Line Paint mode, you can draw in a line that is always 1 tile thick (no matter its orientation).
If you right-click while in Line Paint mode, you will erase in a line.
If you have selected multiple tiles in the TileMap or using the Selection tool, you can place them in a repeating pattern across the line.
You can toggle this mode temporarily while in Paint or Eraser mode by holding Shift then drawing.
Using the line tool after selecting two tiles to draw platforms diagonally¶
Rectangle¶
After selecting Rectangle Paint mode, you can draw in an axis-aligned rectangle.
If you right-click while in Rectangle Paint mode, you will erase in an axis-aligned rectangle.
If you have selected multiple tiles in the TileMap or using the Selection tool, you can place them in a repeating pattern within the rectangle.
You can toggle this mode temporarily while in Paint or Eraser mode by holding Ctrl and Shift then drawing.
Bucket Fill¶
After selecting Bucket Fill mode, you can choose whether painting should be limited to contiguous areas only by toggling the Contiguous checkbox that appears on the right of the toolbar.
If you enable Contiguous (the default), only matching tiles that touch the current selection will be replaced. This contiguous check is performed horizontally and vertically, but not diagonally.
If you disable Contiguous, all tiles with the same ID in the entire TileMap will be replaced by the currently selected tile. If selecting an empty tile with Contiguous unchecked, all tiles in the rectangle that encompasses the TileMap's effective area will be replaced instead.
If you right-click while in Bucket Fill mode, you will replace matching tiles with empty tiles.
If you have selected multiple tiles in the TileMap or using the Selection tool, you can place them in a repeating pattern within the filled area.
Using the Bucket Fill tool¶
Picker¶
After selecting Picker mode, you can pick existing tiles in the 2D editor by holding Ctrl then clicking on a tile. This will switch the currently painted tile to the tile you've just clicked. You can also pick multiple tiles at once by holding down the left mouse button and forming a rectangle selection. Only non-empty tiles can be picked.
You can toggle this mode temporarily while in Paint mode by holding Ctrl then clicking or dragging the mouse.
Eraser¶
This mode is combined with any other painting mode (Paint, Line, Rectangle, Bucket Fill). When eraser mode is enabled, tiles will be replaced by empty tiles instead of drawing new lines when left-clicking.
You can toggle this mode temporarily while in any other mode by right-clicking instead of left-clicking.
Painting randomly using scattering¶
While painting, you can optionally enable randomization. When enabled, a random tile will be chosen between all the currently selected tiles when painting. This is supported with the Paint, Line, Rectangle and Bucket Fill tools. For effective paint randomization, you must select multiple tiles in the TileMap editor or use scattering (both approaches can be combined).
If Scattering is set to a value greater than 0, there is a chance that no tile will be placed when painting. This can be used to add occasional, non-repeating detail to large areas (such as adding grass or crumbs on a large top-down TileMap).
Example when using Paint mode:
Selecting from several times to randomly choose, then painting by holding down the left mouse button¶
Example when using Bucket Fill mode:
Using Bucket Fill tool with a single tile, but with randomization and scattering enabled¶
Note
Eraser mode does not take randomization and scattering into account. All tiles within the selection are always removed.
Saving and loading premade tile placements using patterns¶
While you can copy and paste tiles while in Select mode, you may wish to save premade patterns of tiles to place together in a go. This can be done on a per-TileMap basis by choosing the Patterns tab of the TileMap editor.
To create a new pattern, switch to Select mode, perform a selection and press Ctrl + C. Click on empty space within the Patterns tab (a blue focus rectangle should appear around the empty space), then press Ctrl + V:
Creating a new pattern from a selection in the TileMap editor¶
To use an existing pattern, click its image in the Patterns tab, switch to any painting mode, then left-click somewhere in the 2D editor:
Placing an existing pattern using the TileMap editor¶
Like multi-tile selections, patterns will be repeated if used with the Line, Rectangle or Bucket Fill painting modes.
Note
Despite being edited in the TileMap editor, patterns are stored in the TileSet resource. This allows reusing patterns in different TileMapLayer nodes after loading a TileSet resource saved to an external file.
Handling tile connections automatically using terrains¶
To use terrains, the TileMapLayer node must feature at least one terrain set and a terrain within this terrain set. See Creating terrain sets (autotiling) if you haven't created a terrain set for the TileSet yet.
There are 3 kinds of painting modes available for terrain connections:
Connect, where tiles are connected to surrounding tiles on the same TileMapLayer.
Path, where tiles are connected to tiles painted in the same stroke (until the mouse button is released).
Tile-specific overrides to resolve conflicts or handle situations not covered by the terrain system.
The Connect mode is easier to use, but Path is more flexible as it allows for more artist control during painting. For instance, Path can allow roads to be directly adjacent to each other without being connected to each other, while Connect will force both roads to be connected.
Selecting Connect mode in the TileMap editor's Terrains tab¶
Selecting Path mode in the TileMap editor's Terrains tab¶
Lastly, you can select specific tiles from the terrain to resolve conflicts in certain situations:
Painting with specific tiles in the TileMap editor's Terrains tab¶
Any tile that has at least one of its bits set to a value set to the corresponding terrain ID will appear in the list of tiles to choose from.
Handling missing tiles¶
If you remove tiles in the TileSet that are referenced in a TileMap, the TileMap will display a placeholder to indicate that an invalid tile ID is placed:
Missing tiles in the TileMap editor due to the TileSet reference being broken¶
These placeholders are not visible in the running project, but the tile data is still persisted to disk. This allows you to safely close and reopen such scenes. Once you re-add a tile with the matching ID, the tiles will appear with the new tile's appearance.
Note
Missing tile placeholders may not be visible until you select the TileMapLayer node and open the TileMap editor.