Up to date
This page is up to date for Redot 4.3.
If you still find outdated information, please create an issue.
float¶
A built-in type for floating-point numbers.
Description¶
The float built-in type is a 64-bit double-precision floating-point number, equivalent to double in C++. This type has 14 reliable decimal digits of precision. The maximum value of float is approximately 1.79769e308, and the minimum is approximately -1.79769e308.
Many methods and properties in the engine use 32-bit single-precision floating-point numbers instead, equivalent to float in C++, which have 6 reliable decimal digits of precision. For data structures such as Vector2 and Vector3, Redot uses 32-bit floating-point numbers by default, but it can be changed to use 64-bit doubles if Redot is compiled with the precision=double option.
Math done using the float type is not guaranteed to be exact and will often result in small errors. You should usually use the @GlobalScope.is_equal_approx and @GlobalScope.is_zero_approx methods instead of == to compare float values for equality.
Tutorials¶
Constructors¶
float() |
|
Operators¶
operator !=(right: float) |
|
operator !=(right: int) |
|
operator *(right: Color) |
|
operator *(right: Quaternion) |
|
operator *(right: Vector2) |
|
operator *(right: Vector2i) |
|
operator *(right: Vector3) |
|
operator *(right: Vector3i) |
|
operator *(right: Vector4) |
|
operator *(right: Vector4i) |
|
operator *(right: float) |
|
operator *(right: int) |
|
operator **(right: float) |
|
operator **(right: int) |
|
operator +(right: float) |
|
operator +(right: int) |
|
operator -(right: float) |
|
operator -(right: int) |
|
operator /(right: float) |
|
operator /(right: int) |
|
operator <(right: float) |
|
operator <(right: int) |
|
operator <=(right: float) |
|
operator <=(right: int) |
|
operator ==(right: float) |
|
operator ==(right: int) |
|
operator >(right: float) |
|
operator >(right: int) |
|
operator >=(right: float) |
|
operator >=(right: int) |
|
Constructor Descriptions¶
Constructs a default-initialized float set to 0.0.
Constructs a float as a copy of the given float.
Converts a String to a float, following the same rules as String.to_float.
Cast a bool value to a floating-point value, float(true) will be equal to 1.0 and float(false) will be equal to 0.0.
Cast an int value to a floating-point value, float(1) will be equal to 1.0.
Operator Descriptions¶
bool operator !=(right: float) 🔗
Returns true if two floats are different from each other.
Note: @GDScript.NAN doesn't behave the same as other numbers. Therefore, the results from this operator may not be accurate if NaNs are included.
bool operator !=(right: int) 🔗
Returns true if the integer has different value than the float.
Color operator *(right: Color) 🔗
Multiplies each component of the Color, including the alpha, by the given float.
print(1.5 * Color(0.5, 0.5, 0.5)) # Prints "(0.75, 0.75, 0.75, 1.5)"
Quaternion operator *(right: Quaternion) 🔗
Multiplies each component of the Quaternion by the given float. This operation is not meaningful on its own, but it can be used as a part of a larger expression.
Vector2 operator *(right: Vector2) 🔗
Multiplies each component of the Vector2 by the given float.
print(2.5 * Vector2(1, 3)) # Prints "(2.5, 7.5)"
Vector2 operator *(right: Vector2i) 🔗
Multiplies each component of the Vector2i by the given float. Returns a Vector2.
print(0.9 * Vector2i(10, 15)) # Prints "(9, 13.5)"
Vector3 operator *(right: Vector3) 🔗
Multiplies each component of the Vector3 by the given float.
Vector3 operator *(right: Vector3i) 🔗
Multiplies each component of the Vector3i by the given float. Returns a Vector3.
print(0.9 * Vector3i(10, 15, 20)) # Prints "(9, 13.5, 18)"
Vector4 operator *(right: Vector4) 🔗
Multiplies each component of the Vector4 by the given float.
Vector4 operator *(right: Vector4i) 🔗
Multiplies each component of the Vector4i by the given float. Returns a Vector4.
print(0.9 * Vector4i(10, 15, 20, -10)) # Prints "(9, 13.5, 18, -9)"
float operator *(right: float) 🔗
Multiplies two floats.
float operator *(right: int) 🔗
Multiplies a float and an int. The result is a float.
float operator **(right: float) 🔗
Raises a float to a power of a float.
print(39.0625**0.25) # 2.5
float operator **(right: int) 🔗
Raises a float to a power of an int. The result is a float.
print(0.9**3) # 0.729
float operator +(right: float) 🔗
Adds two floats.
float operator +(right: int) 🔗
Adds a float and an int. The result is a float.
float operator -(right: float) 🔗
Subtracts a float from a float.
float operator -(right: int) 🔗
Subtracts an int from a float. The result is a float.
float operator /(right: float) 🔗
Divides two floats.
float operator /(right: int) 🔗
Divides a float by an int. The result is a float.
bool operator <(right: float) 🔗
Returns true if the left float is less than the right one.
Note: @GDScript.NAN doesn't behave the same as other numbers. Therefore, the results from this operator may not be accurate if NaNs are included.
Returns true if this float is less than the given int.
bool operator <=(right: float) 🔗
Returns true if the left float is less than or equal to the right one.
Note: @GDScript.NAN doesn't behave the same as other numbers. Therefore, the results from this operator may not be accurate if NaNs are included.
bool operator <=(right: int) 🔗
Returns true if this float is less than or equal to the given int.
bool operator ==(right: float) 🔗
Returns true if both floats are exactly equal.
Note: Due to floating-point precision errors, consider using @GlobalScope.is_equal_approx or @GlobalScope.is_zero_approx instead, which are more reliable.
Note: @GDScript.NAN doesn't behave the same as other numbers. Therefore, the results from this operator may not be accurate if NaNs are included.
bool operator ==(right: int) 🔗
Returns true if the float and the given int are equal.
bool operator >(right: float) 🔗
Returns true if the left float is greater than the right one.
Note: @GDScript.NAN doesn't behave the same as other numbers. Therefore, the results from this operator may not be accurate if NaNs are included.
Returns true if this float is greater than the given int.
bool operator >=(right: float) 🔗
Returns true if the left float is greater than or equal to the right one.
Note: @GDScript.NAN doesn't behave the same as other numbers. Therefore, the results from this operator may not be accurate if NaNs are included.
bool operator >=(right: int) 🔗
Returns true if this float is greater than or equal to the given int.
Returns the same value as if the + was not there. Unary + does nothing, but sometimes it can make your code more readable.
Returns the negative value of the float. If positive, turns the number negative. If negative, turns the number positive. With floats, the number zero can be either positive or negative.