TileSetAtlasSource

Vector2i margins = Vector2i(0, 0)

Margins, in pixels, to offset the origin of the grid in the texture.

Vector2i separation = Vector2i(0, 0)

Separation, in pixels, between each tile texture region of the grid.

Texture2D texture

The atlas texture.

Vector2i texture_region_size = Vector2i(16, 16)

The base tile size in the texture (in pixel). This size must be bigger than or equal to the TileSet's tile_size value.

bool use_texture_padding = true

If true, generates an internal texture with an additional one pixel padding around each tile. Texture padding avoids a common artifact where lines appear between tiles. Disabling this setting might lead a small performance improvement, as generating the internal texture requires both memory and processing time when the TileSetAtlasSource resource is modified.

void clear_tiles_outside_texture()

Removes all tiles that don't fit the available texture area. This method iterates over all the source's tiles, so it's advised to use has_tiles_outside_texture() beforehand.

int create_alternative_tile(Vector2i atlas_coords, int alternative_id_override = -1)

Creates an alternative tile for the tile at coordinates atlas_coords. If alternative_id_override is -1, give it an automatically generated unique ID, or assigns it the given ID otherwise. Returns the new alternative identifier, or -1 if the alternative could not be created with a provided alternative_id_override.

void create_tile(Vector2i atlas_coords, Vector2i size = Vector2i(1, 1))

Creates a new tile at coordinates atlas_coords with the given size.

Vector2i get_atlas_grid_size() const

Returns the atlas grid size, which depends on how many tiles can fit in the texture. It thus depends on the texture's size, the atlas margins, and the tiles' texture_region_size.

int get_next_alternative_tile_id(Vector2i atlas_coords) const

Returns the alternative ID a following call to create_alternative_tile() would return.

Texture2D get_runtime_texture() const

If use_texture_padding is false, returns texture. Otherwise, returns and internal ImageTexture created that includes the padding.

Rect2i get_runtime_tile_texture_region(Vector2i atlas_coords, int frame) const

Returns the region of the tile at coordinates atlas_coords for the given frame inside the texture returned by get_runtime_texture(). Note: If use_texture_padding is false, returns the same as get_tile_texture_region().

int get_tile_animation_columns(Vector2i atlas_coords) const

Returns how many columns the tile at atlas_coords has in its animation layout.

float get_tile_animation_frame_duration(Vector2i atlas_coords, int frame_index) const

Returns the animation frame duration of frame frame_index for the tile at coordinates atlas_coords.

int get_tile_animation_frames_count(Vector2i atlas_coords) const

Returns how many animation frames has the tile at coordinates atlas_coords.

int get_tile_animation_mode(Vector2i atlas_coords) const

Returns the tile animation mode of the tile at atlas_coords. See also set_tile_animation_mode().

Vector2i get_tile_animation_separation(Vector2i atlas_coords) const

Returns the separation (as in the atlas grid) between each frame of an animated tile at coordinates atlas_coords.

float get_tile_animation_speed(Vector2i atlas_coords) const

Returns the animation speed of the tile at coordinates atlas_coords.

float get_tile_animation_total_duration(Vector2i atlas_coords) const

Returns the sum of the sum of the frame durations of the tile at coordinates atlas_coords. This value needs to be divided by the animation speed to get the actual animation loop duration.

Vector2i get_tile_at_coords(Vector2i atlas_coords) const

If there is a tile covering the atlas_coords coordinates, returns the top-left coordinates of the tile (thus its coordinate ID). Returns Vector2i(-1, -1) otherwise.

TileData get_tile_data(Vector2i atlas_coords, int alternative_tile) const

Returns the TileData object for the given atlas coordinates and alternative ID.

Vector2i get_tile_size_in_atlas(Vector2i atlas_coords) const

Returns the size of the tile (in the grid coordinates system) at coordinates atlas_coords.

Rect2i get_tile_texture_region(Vector2i atlas_coords, int frame = 0) const

Returns a tile's texture region in the atlas texture. For animated tiles, a frame argument might be provided for the different frames of the animation.

PackedVector2Array get_tiles_to_be_removed_on_change(Texture2D texture, Vector2i margins, Vector2i separation, Vector2i texture_region_size)

Returns an array of tiles coordinates ID that will be automatically removed when modifying one or several of those properties: texture, margins, separation or texture_region_size. This can be used to undo changes that would have caused tiles data loss.

bool has_room_for_tile(Vector2i atlas_coords, Vector2i size, int animation_columns, Vector2i animation_separation, int frames_count, Vector2i ignored_tile = Vector2i(-1, -1)) const

Returns whether there is enough room in an atlas to create/modify a tile with the given properties. If ignored_tile is provided, act as is the given tile was not present in the atlas. This may be used when you want to modify a tile's properties.

bool has_tiles_outside_texture() const

Checks if the source has any tiles that don't fit the texture area (either partially or completely).

void move_tile_in_atlas(Vector2i atlas_coords, Vector2i new_atlas_coords = Vector2i(-1, -1), Vector2i new_size = Vector2i(-1, -1))

Move the tile and its alternatives at the atlas_coords coordinates to the new_atlas_coords coordinates with the new_size size. This functions will fail if a tile is already present in the given area. If new_atlas_coords is Vector2i(-1, -1), keeps the tile's coordinates. If new_size is Vector2i(-1, -1), keeps the tile's size. To avoid an error, first check if a move is possible using has_room_for_tile().

void remove_alternative_tile(Vector2i atlas_coords, int alternative_tile)

Remove a tile's alternative with alternative ID alternative_tile. Calling this function with alternative_tile equals to 0 will fail, as the base tile alternative cannot be removed.

void remove_tile(Vector2i atlas_coords)

Remove a tile and its alternative at coordinates atlas_coords.

void set_alternative_tile_id(Vector2i atlas_coords, int alternative_tile, int new_id)

Change a tile's alternative ID from alternative_tile to new_id. Calling this function with new_id of 0 will fail, as the base tile alternative cannot be moved.

void set_tile_animation_columns(Vector2i atlas_coords, int frame_columns)

Sets the number of columns in the animation layout of the tile at coordinates atlas_coords. If set to 0, then the different frames of the animation are laid out as a single horizontal line in the atlas.

void set_tile_animation_frame_duration(Vector2i atlas_coords, int frame_index, float duration)

Sets the animation frame duration of frame frame_index for the tile at coordinates atlas_coords.

void set_tile_animation_frames_count(Vector2i atlas_coords, int frames_count)

Sets how many animation frames the tile at coordinates atlas_coords has.

void set_tile_animation_mode(Vector2i atlas_coords, int mode)

Sets the tile animation mode of the tile at atlas_coords to mode. See also get_tile_animation_mode().

void set_tile_animation_separation(Vector2i atlas_coords, Vector2i separation)

Sets the margin (in grid tiles) between each tile in the animation layout of the tile at coordinates atlas_coords has.

void set_tile_animation_speed(Vector2i atlas_coords, float speed)

Sets the animation speed of the tile at coordinates atlas_coords has.

TILE_ANIMATION_MODE_DEFAULT = 0

Enum: TileAnimationMode

Tile animations start at same time, looking identical.

TILE_ANIMATION_MODE_RANDOM_START_TIMES = 1

Enum: TileAnimationMode

Tile animations start at random times, looking varied.

TILE_ANIMATION_MODE_MAX = 2

Enum: TileAnimationMode

Represents the size of the TileAnimationMode enum.

TRANSFORM_FLIP_H = 4096

Represents cell's horizontal flip flag. Should be used directly with TileMapLayer to flip placed tiles by altering their alternative IDs.

			var alternate_id = $TileMapLayer.get_cell_alternative_tile(Vector2i(2, 2))
			if not alternate_id & TileSetAtlasSource.TRANSFORM_FLIP_H:
				# If tile is not already flipped, flip it.
				$TileMapLayer.set_cell(Vector2i(2, 2), source_id, atlas_coords, alternate_id | TileSetAtlasSource.TRANSFORM_FLIP_H)
			

Note: These transformations can be combined to do the equivalent of 0, 90, 180, and 270 degree rotations, as shown below:

			enum TileTransform {
				ROTATE_0 = 0,
				ROTATE_90 = TileSetAtlasSource.TRANSFORM_TRANSPOSE | TileSetAtlasSource.TRANSFORM_FLIP_H,
				ROTATE_180 = TileSetAtlasSource.TRANSFORM_FLIP_H | TileSetAtlasSource.TRANSFORM_FLIP_V,
				ROTATE_270 = TileSetAtlasSource.TRANSFORM_TRANSPOSE | TileSetAtlasSource.TRANSFORM_FLIP_V,
			}
			

TRANSFORM_FLIP_V = 8192

Represents cell's vertical flip flag. See TRANSFORM_FLIP_H for usage.

TRANSFORM_TRANSPOSE = 16384

Represents cell's transposed flag. See TRANSFORM_FLIP_H for usage.